In case of error, you can fully reinitialize your modem by clicking to button below.
Information
Port
Triggering is an advanced feature you can use to enable dynamic port
forwarding for certain applications. The gateway monitors outgoing
traffic on the ports specified by the Trigger Range. When it detects
activity on these ports, it remembers the IP address of the computer
that sent the data and routes incoming traffic on ports in the Target
Range to that IP address on the LAN.
For each port trigger you would like to enable:
Enter
the Start and End Port for the Trigger Range. These are the ports that
will be monitored to trigger the incoming port forwarding rule.
Enter the Start and End Port for the Target Range. These are the incoming ports that will be opened when triggered.
Select the protocol for the ports, either TCP, UDP or Both.
Check the Enable box to activate the port trigger.
To remove a configured Port Trigger from the table:
Select the trigger by clicking the radio button corresponding to the entry in the table.